SLIDER AND ROLLER BED BELT CONVEYOR (BCST)
BCST-100 (Light Duty)
- Bolt-Together constuction
- 3 1/2 in. x 12 ga. Formed galvanized frame
- Belt Widths up to 36"
- Drive packages available from 1/3 HP to 2 HP
- Note: Some parts on this unit are powder coated - mild steel.
Black Trackmate 120 EMB with clipper lace
12", 16", 18", 20", 24", 30" and 36"
3 1/2 in. deep x 12 ga. galvanized steel slider bed. Standard 5 FT. and 10 ft. long bolt-together sections with bolt-on end couplers.
1.9 in. dia. x 16 ga. galvanized rollers spaced every 6 inches. Mounted in 5 1/2 in. deep x 12 ga.galvanized steel frames. Standard 5 FT. and 10 ft. long bolt-together sections with bolt-on end couplers.
Ajustable 32 1/8 in. to 38 1/8 in. top of belt. One support at every bed joint and at the ends of conveyor.
4 in. dia. with 1 3/16 in. dia. shaft or 8 in. dia. with 1 7/16 in. dia. shaft,crowned and fully lagged.
4 in. dia. with 1 3/16 in.dia. shaft, crowned.
2 1/2 in. dia. galvanized with grease packed ball bearings (Adjustable)
1.9 in. dia. galvanized with grease packed bearings.
Provides belt take-up at tail pulley to allow for future belt stretch.
Sealed,pre-lubricated,self-aligning ball bearings on drive and tail pulleys.
Constant 60 FPM
Sealed worm gear "C" face flanged speed reducer with NO. 50 chain to drive pulley.
1/2 HP - 230/460V - 3 phase - 60Hz -totally enclosed,fan cooled.
Available as option
Slider bed maximum load per linear foot with legs on 10 ft. centers = 100 lbs. Roller bed = 240 lbs.
For additional equipment options see technical page.